- Air Cleaner
- Air Intake Kit
- EGR Delete Kit
- CCV Reroute Kit
- Hood Air Scoop
- Intake Manifold
- Throttle Body
- Throttle Cable
- NOS Bottle Bracket
- Carburetor
- Carburetor Spacer
- Fuel Pump
- Fuel Pump Bracket
- Fuel Regulator
- Fuel Filter
- Fuel Components
- Fuel Cell
- Fuel Cell Bracket
- Fuel Cell Cap
- Fuel Level Sender
- Fuel Level Gauge
- Fuel Tank
- Fuel Rail Kit
Fan Control Kit
Adjustable Electric Fan Control Kit FMK06
Adjustable Electric Fan Control Kit
Designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8″ NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F – 240°F, and turn-off preset at 10°F lower than turn-on.
Features
- Adjustable turn-on temperature from 150-240°F
- Turn-off temperature is preset at 10°F below turn-on temperature
- Thread in 3/8″ NPT temperature sensor
- Heavy duty 40/60 amp relay *rated at maximum 25 amp continuous draw – operates a single fan or two fans with a combined draw of 25 amps or less
- AC override circuit included
- Ground circuit relay
Adjustable Electric Fan Control Relay Kit FMK05
Adjustable Electric 12V Radiator Fan Thermostat Control Relay Wire Kit
Description:
- American Volt adjustable fan thermostat w/ stainless temperature probe sensor.
- Probe measures liquid or contact temperature and sends power to the fan.
- Flexible turn-on/turn-off temperature control range of 32°F-248°F (0-120°C).
- 3-pin design allows thermostat to be wired as a normally open OR closed circuit.
- Probe can be mounted between radiator fins or inside inlet/outlet tube.
- Turn-off temperature is always 15 degrees less than turn-on.
- Thermostat dial has both Celsius and Fahrenheit temperature markings.
- Capillary thermostat wire is 30 inches in length.
- Professional installation is highly recommended
Digital Adjustable Temperature Switch
Digital Adjustable Thermostat Probe Electric Radiator Fan Temperature Switch Kit
- 104-230°F digital adjustable electric fan thermostat switch wiring kit
- Temperature sensor probe inserts between radiator or oil cooler fins
- 40 amp relay harness with 14AWG wire powers up to 2 electric fans
- This fan switch kit is compatible with either 12 or 24 volt applications
- Maximum 30 amp continuous draw with 30 amp in-line fuse per fan
- A/C override or manual toggle switch wire built directly into harness
- Optional second fan starts 10 seconds after first fan begins cooling
- Installation instructions, wiring diagram and components included
Electric Fan Control FMK02
Electric Fan Control Relay Kits with Thermostatic Switch, 30 Amp Relay & Circuit Breaker, On 185 F – Off 170 F Degrees
Our electric fan relay kits come with a threaded thermostatic switch that screws into the engine block or intake manifold for a clean and professional look. These kits provide protection in the way of a 30 Amp circuit breaker for your electric fans and wiring harnesses. They supply constant voltage through a 30 Amp relay, protect against voltage and amperage spikes, and also prevent the fan from back-feeding voltage through your vehicle’s wiring harnesses. Operating temperature is between 165F and 180F.

